Hot Rolled Steel Structural Material Q235 Q355b ASTM A36 I Beam Carbon Steel H Beam

Product Description

H-shaped steel is an economical cross-section high-efficiency profile with more optimized cross-sectional area distribution and a more reasonable strength-to-weight ratio. It is named because its cross-section is the same as the English letter "H". Since all parts of the H-shaped steel are arranged at right angles, the H-shaped steel has the advantages of strong bending resistance in all directions, simple construction, cost saving and light structural weight, and has been widely used.

Our factory has strong strength, advanced technology and equipment, experienced engineers, and can accept customized services.If any question,feel free to contact us.^_^

H beams are widely used in many constructions,such as building,highway,bridge,railway,tunnel,petroleum chemical industry and electric power industry equipment structure.H beam is environmentally friendly and reduce the nuisance dusts.H beam also can save the working time,because it is easy to carry and can be used in any weath.

The inner and outer sides of the flange of the H-beam are parallel or close to parallel, and the end of the flange is at a right angle, so it is named parallel flange I-beam. The web thickness of the H-shaped steel is smaller than that of the ordinary I-beam with the same height of the web, and the width of the flange is larger than that of the ordinary I-beam with the same height of the web, so it is also called wide-edge I-beam. Determined by the shape, the section modulus, moment of inertia and corresponding strength of H-beams are significantly better than ordinary I-beams of the same single weight. Used in metal structures with different requirements, whether it bears bending moment, pressure load, or eccentric load, it shows its superior performance. Compared with ordinary I-beams, it can greatly improve the bearing capacity and save 10% to 40% of metal. H-shaped steel has wide flanges, thin webs, multiple specifications, and flexible use. It can save 15% to 20% of metal in various truss structures. Because the inner and outer sides of the flanges are parallel and the edges are at right angles, it is easy to assemble and combine into various components, thereby saving about 25% of the welding and riveting workload, which can greatly speed up the construction speed of the project and shorten the construction period.

Product Parameters

H beam Section size (mm)
Height×Breadth	Web thickness	Flange thickness	Weight (kg/m)
100×100	6	8	16.9
125×125	6.5	9	23.6
150×150	7	10	31.1
175×175	7.5	11	40.4
200×200	8	12	49.9
250×250	9	14	71.8
300×300	10	15	93.0
300×300	15	15	105.0
350×350	12	19	134.9
400×400	13	21	171.7
148×100	6	9	20.7
194×150	6	9	29.9
244×175	7	11	43.6
294×200	8	12	55.8
340×250	9	14	78.1
390×300	10	16	104.6
440×300	11	18	120.8
482×300	11	15	110.8
488×300	11	18	124.9
582×300	12	17	132.8
588×300	12	20	147.0
100×50	5	7	9.3
125×60	6	8	13.1
150×75	5	7	14.0
175×90	5	8	18.0
198×99	4.5	7	17.8
200×100	5.5	8	20.9
248×124	5	8	25.1
250×125	6	9	29.0
298×149	5.5	8	32.0
300×150	6.5	9	36.7
346×174	6	9	41.2
350×175	7	11	49.4
396×199	7	11	56.1
400×200	8	13	65.4
446×199	8	12	65.1
450×200	9	14	74.9
496×199	9	14	77.9
500×200	10	16	88.1
596×199	10	15	92.4
600×200	11	17	103.4
700×300	13	24	181.8
800×300	14	26	206.8
900×300	16	28	240.1

 

Detailed Photos

 

H-shaped steel can be produced by welding or rolling. Welding H-shaped steel is to cut the strip steel with suitable thickness into suitable width, and weld the flange and web together on the continuous welding unit. Welded H-shaped steel has disadvantages such as large metal consumption, difficulty in ensuring uniform product performance, and limited size specifications. Therefore, H-shaped steel is mainly produced by rolling method.

What is an H-beam used for?

H Beams are commonly used in the constuction of buildings as well but also large trailers and bridges,among others.Due to their slightly different cross-section shape, thicker central web and wider flanges, H beams can bear larger loads than I beams.

 

Which is cheaper I-beam or H-beam?
H-Beams cost less than I-Beams For The Same Amount of Structural Support. H beams and I beams are two different types of structural steel members that are commonly used in construction.

What grade is H beam?

Steel h-pile beams and steel wide flange beams come in eight ASTM standards, including A36, A572-Grade 50, A588, A690, A709, A913-Grade 50, A913-Grade 65, and A992.

Application

 

 Various stamping parts, architectural and engineering structures and some less important machine structures and zero parts.

Due to the above advantages, H-shaped steel is widely used, mainly for: various civil and industrial building structures; various large-span industrial plants and modern high-rise buildings, especially industrial plants in areas with frequent seismic activities and high-temperature working conditions; requirements Large bridges with large bearing capacity, good section stability, and large spans; heavy equipment; highways; ship skeletons; mine support; foundation treatment and dam engineering; various machine components.

FAQ

Q1:How about the quality?
A:Third party inspections are always welcomed, like TUV, BV, SGS.   All of the goods will be released together with MTC and stamped by TPI. 

Q2: Can you accept customization?
A: Yes.we can do customization for you.

Q3: Do you provide samples? Free or not?
A: Yes, we could offer the sample for free but do not pay the cost of freight.

Q4: How long is the delivery time?
A: Generally about 5-10 days if the goods in stock. Or will be 15-30 days if not in stock.

Q5: How about the trade terms?
A: EXW, FOB, CFR, CIF, LC will be accepted.

CONTACT: MS CINDY YANG
Boer King Steel Group
Tianjin Boer King Steel  Co.,Ltd
Tianjin Boer King Steel Import and export Co.,Ltd
Add: No.602,Shuanggang Development Zone,Tianjin,300350 China.